Home > products > Valve > Automatic Control Valves

WWW,908123,COM

Features

The Pressure Relief & Sustaining Control Valve maintains the inlet pressure at minimal reselected value. To hold a steady line pressure the valve is opening fast and closed gradually to prevent surge. If installed on a by-pass line, main line pressure is accurately controlled by relief of excess pressure.
500X Pressure Relief & Sustaining Control Valve is used in the pipeline system to prevent of surpassing pressure or to keep the pressure of it, to reduce the water hammers shock after the pump is closed and also used as a water hammer remover in the large water supply system. A self cleaning filter screen is placed on the inlet of the valves control system, which stops the suspension grains of the bigger specific gravity and diameter from going into the system by means of the bigger specific gravity of the fluid to ensure the main valves water supply pressure at the upstream at the set value, and to get the system circulated smoothly without any resistance. This valve features by sensitive open-close, safety, reliability, stable motion and long duration.

Supplier: Saitai Valve, China
Manufacturer: Shop in Shanghai Qingpu Industrial Park

Pressure Relief & Sustaining Control Valves

1. Small Ball Valve
2. Pilot Valve
3. Small Ball Valve
4. Small Ball Valve
5. Needle Valve

Technical Parameters

Nominal Pressure: 1.0, 1.6, 2.5MPa
Shell test pressure: 1.5, 2.4, 3.75MPa
Sealed test pressure : 1.1, 1.76, 2.75MPa
Suitable temperature: 80
Suitable medium: water, Sewage

Materials

Serial No.	Part	Material
1	Body	Cast Iron (GG25, HT200) / Ductile Iron (GG40, QT)
2	Pin	Bronze
3	Seat	2Cr13 / SS 304 / SS 316
4	O-ring Gasket	NBR
5	O-ring	NBR
6	O-ring washer	Cast Iron
7	O-RING	NBR
8	Stem	2Cr13 / SS 304 / SS 316
9	Disc	Cast Iron (GG25, HT200) / Ductile Iron (GG40, QT)
10	Diaphragm	Rubber
11	Diaphragm washer	Bronze
12	Ball valve	Bronze
13	Nut	H62
14	Spring	50CrVA
15	Cover	Cast Iron (GG25, HT200) / Ductile Iron (GG40, QT)
16	Pilot Socket	H62
17	Nut	35
18	Stud	35
19	Ball valve	Bronze
20	Pressure relief valve	Bronze
21	Ball Valve	Bronze
22	Pressure show
23	Needle valve	Bronze
24	Micro-strainer	304
25	Connection socket	Cast Iron

Dimensions

DNmm		20	25	32	40	50	65	80	100	125	150	200	250	300	350	400	450	500
L		180	180	180	203	203	235	285	360	400	455	585	650	800	860	915	980	1075
PN10	D	105	115	135	145	160	180	195	215	245	280	335	390	440	500	565	615	670
PN10	D1	75	85	100	110	125	145	160	180	210	240	295	350	400	460	515	565	620
PN16	D	105	115	135	145	160	180	195	215	245	280	335	405	460	520	580	640	705
PN16	D1	75	85	100	110	125	145	160	180	210	240	295	355	410	470	525	585	650
PN25	D	105	110	135	145	160	180	195	230	270	300	360	425	485	550	610	660	730
PN25	D1	75	85	100	110	125	145	160	190	220	250	310	370	430	490	550	600	660
H		550	550	550	610	610	625	645	750	808	864	1135	1185	1325	1385	1445	1325	1430
H1		460	460	460	516	516	520	538	596	655	710	805	855	955	990	1030	905	960

Typical Installation

Pressure Relief & Sustaining Control Valves Related Products

Next:Solenoid Control Valves

Catalog:Automatic Control Valves

Above:WWW,908123,COMRate-of-Flow Control Valves